BRBVS - 98 RESIN
- MSDS: BRBVS
- Manufacturer: TECHNO ADHESIVES CO
- Product Name: 98 RESIN
- National Stock Number: 8040-00F028331
Product Identification
Product ID:98 RESIN
MSDS Date:12/01/1986
FSC:8040
NIIN:00F028331
MSDS Number: BRBVS
Responsible Party
CINCINNATI, OH 45241
US
Emergency Phone: 513-771-1584
Info Phone: 513-771-1584
Cage: GO228
Contractor
Telephone: 513-771-1584
Cage: GO228
Ingredients
NON-HAZARDOUS FOR INGREDIENTS
9.7
RTECS: 9999999WG
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, SENSITIZATION.
INHALATION: NAUSEA & RESPIRATORY TRACT IRRITATION. INGESTION:
IRRITATION.
Explanation of Carcinogenicity:NONE
First Aid
First Aid:SKIN/EYES: FLUSH W/PLENTY OF WATER. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point:>400F
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, FOAM, OR CO2
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOSED CONTAINERS
COOL. TREAT AS CLASS B FIRE. IF SPILLED, USE WATER SPRAY TO
DISPERSE VAPORS. USE GOGGLES/BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (PRESSURE
BUILDUP) WHEN EXPOSED TO HEAT.
Accidental Release
Spill Release Procedures:ELIMINATE IGNITION SOURCES. DIKE SPILL TO
MINIMIZE CONTAMINATION. COMPLETELY ABSORB W/INERT MATERIAL, SWEEP,
OR SCOOP UP & DISPOSE. FLUSH AREA IMMEDIATELY W/PLENTY OF WATER;
REMOVE FROM WATERWAY ENTRY .
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT & OPEN FLAME.
Other Precautions:AVOID CONTAMINATION OF SKIN.
Exposure Controls
Respiratory Protection:AS NEEDED.
Ventilation:LOCAL EXHAUST: RECOMMENDED IN CLOSED EXPOSURE.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:SAFETY SHOWER & EYEWASH FACILITY
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:>500F
Vapor Pres:<0.01
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN BU AC
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR VISCOUS LIQUID W/MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, MERCAPTANS, & AMINES
Stability Condition to Avoid:EXCESSIVE HEAT, OPEN FLAME, & OTHER
IGNITION SOURCES
Hazardous Decomposition Products:CO2, CO
Conditions to Avoid Polymerization:CONTACT BY AMINE
Disposal
Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN LANDFILL IN
ACCORDANCE W/FEDERAL, STATE, & LOCAL REGULATIONS. U.S. EPA DOESN'T
DEFINE PRODUCT AS WASTE BY RCRA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.